MSP432E4 DriverLib API Guide
1.11.00.03
tmp
bazel_docapi.z9EuJc
source
ti
devices
msp432e4
driverlib
inc
hw_comp.h
Go to the documentation of this file.
1
//*****************************************************************************
2
//
3
// hw_comp.h - Macros used when accessing the comparator hardware.
4
//
5
// Copyright (c) 2005-2017 Texas Instruments Incorporated. All rights reserved.
6
// Software License Agreement
7
//
8
// Redistribution and use in source and binary forms, with or without
9
// modification, are permitted provided that the following conditions
10
// are met:
11
//
12
// Redistributions of source code must retain the above copyright
13
// notice, this list of conditions and the following disclaimer.
14
//
15
// Redistributions in binary form must reproduce the above copyright
16
// notice, this list of conditions and the following disclaimer in the
17
// documentation and/or other materials provided with the
18
// distribution.
19
//
20
// Neither the name of Texas Instruments Incorporated nor the names of
21
// its contributors may be used to endorse or promote products derived
22
// from this software without specific prior written permission.
23
//
24
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
25
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
26
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
27
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
28
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
29
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
30
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
31
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
32
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
33
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
34
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35
//
36
//*****************************************************************************
37
38
#ifndef __HW_COMP_H__
39
#define __HW_COMP_H__
40
41
//*****************************************************************************
42
//
43
// The following are defines for the Comparator register offsets.
44
//
45
//*****************************************************************************
46
#define COMP_O_ACMIS 0x00000000 // Analog Comparator Masked
47
// Interrupt Status
48
#define COMP_O_ACRIS 0x00000004 // Analog Comparator Raw Interrupt
49
// Status
50
#define COMP_O_ACINTEN 0x00000008 // Analog Comparator Interrupt
51
// Enable
52
#define COMP_O_ACREFCTL 0x00000010 // Analog Comparator Reference
53
// Voltage Control
54
#define COMP_O_ACSTAT0 0x00000020 // Analog Comparator Status 0
55
#define COMP_O_ACCTL0 0x00000024 // Analog Comparator Control 0
56
#define COMP_O_ACSTAT1 0x00000040 // Analog Comparator Status 1
57
#define COMP_O_ACCTL1 0x00000044 // Analog Comparator Control 1
58
#define COMP_O_ACSTAT2 0x00000060 // Analog Comparator Status 2
59
#define COMP_O_ACCTL2 0x00000064 // Analog Comparator Control 2
60
#define COMP_O_PP 0x00000FC0 // Analog Comparator Peripheral
61
// Properties
62
63
//*****************************************************************************
64
//
65
// The following are defines for the bit fields in the COMP_O_ACMIS register.
66
//
67
//*****************************************************************************
68
#define COMP_ACMIS_IN2 0x00000004 // Comparator 2 Masked Interrupt
69
// Status
70
#define COMP_ACMIS_IN1 0x00000002 // Comparator 1 Masked Interrupt
71
// Status
72
#define COMP_ACMIS_IN0 0x00000001 // Comparator 0 Masked Interrupt
73
// Status
74
75
//*****************************************************************************
76
//
77
// The following are defines for the bit fields in the COMP_O_ACRIS register.
78
//
79
//*****************************************************************************
80
#define COMP_ACRIS_IN2 0x00000004 // Comparator 2 Interrupt Status
81
#define COMP_ACRIS_IN1 0x00000002 // Comparator 1 Interrupt Status
82
#define COMP_ACRIS_IN0 0x00000001 // Comparator 0 Interrupt Status
83
84
//*****************************************************************************
85
//
86
// The following are defines for the bit fields in the COMP_O_ACINTEN register.
87
//
88
//*****************************************************************************
89
#define COMP_ACINTEN_IN2 0x00000004 // Comparator 2 Interrupt Enable
90
#define COMP_ACINTEN_IN1 0x00000002 // Comparator 1 Interrupt Enable
91
#define COMP_ACINTEN_IN0 0x00000001 // Comparator 0 Interrupt Enable
92
93
//*****************************************************************************
94
//
95
// The following are defines for the bit fields in the COMP_O_ACREFCTL
96
// register.
97
//
98
//*****************************************************************************
99
#define COMP_ACREFCTL_EN 0x00000200 // Resistor Ladder Enable
100
#define COMP_ACREFCTL_RNG 0x00000100 // Resistor Ladder Range
101
#define COMP_ACREFCTL_VREF_M 0x0000000F // Resistor Ladder Voltage Ref
102
#define COMP_ACREFCTL_VREF_S 0
103
104
//*****************************************************************************
105
//
106
// The following are defines for the bit fields in the COMP_O_ACSTAT0 register.
107
//
108
//*****************************************************************************
109
#define COMP_ACSTAT0_OVAL 0x00000002 // Comparator Output Value
110
111
//*****************************************************************************
112
//
113
// The following are defines for the bit fields in the COMP_O_ACCTL0 register.
114
//
115
//*****************************************************************************
116
#define COMP_ACCTL0_TOEN 0x00000800 // Trigger Output Enable
117
#define COMP_ACCTL0_ASRCP_M 0x00000600 // Analog Source Positive
118
#define COMP_ACCTL0_ASRCP_PIN 0x00000000 // Pin value of Cn+
119
#define COMP_ACCTL0_ASRCP_PIN0 0x00000200 // Pin value of C0+
120
#define COMP_ACCTL0_ASRCP_REF 0x00000400 // Internal voltage reference
121
#define COMP_ACCTL0_TSLVAL 0x00000080 // Trigger Sense Level Value
122
#define COMP_ACCTL0_TSEN_M 0x00000060 // Trigger Sense
123
#define COMP_ACCTL0_TSEN_LEVEL 0x00000000 // Level sense, see TSLVAL
124
#define COMP_ACCTL0_TSEN_FALL 0x00000020 // Falling edge
125
#define COMP_ACCTL0_TSEN_RISE 0x00000040 // Rising edge
126
#define COMP_ACCTL0_TSEN_BOTH 0x00000060 // Either edge
127
#define COMP_ACCTL0_ISLVAL 0x00000010 // Interrupt Sense Level Value
128
#define COMP_ACCTL0_ISEN_M 0x0000000C // Interrupt Sense
129
#define COMP_ACCTL0_ISEN_LEVEL 0x00000000 // Level sense, see ISLVAL
130
#define COMP_ACCTL0_ISEN_FALL 0x00000004 // Falling edge
131
#define COMP_ACCTL0_ISEN_RISE 0x00000008 // Rising edge
132
#define COMP_ACCTL0_ISEN_BOTH 0x0000000C // Either edge
133
#define COMP_ACCTL0_CINV 0x00000002 // Comparator Output Invert
134
135
//*****************************************************************************
136
//
137
// The following are defines for the bit fields in the COMP_O_ACSTAT1 register.
138
//
139
//*****************************************************************************
140
#define COMP_ACSTAT1_OVAL 0x00000002 // Comparator Output Value
141
142
//*****************************************************************************
143
//
144
// The following are defines for the bit fields in the COMP_O_ACCTL1 register.
145
//
146
//*****************************************************************************
147
#define COMP_ACCTL1_TOEN 0x00000800 // Trigger Output Enable
148
#define COMP_ACCTL1_ASRCP_M 0x00000600 // Analog Source Positive
149
#define COMP_ACCTL1_ASRCP_PIN 0x00000000 // Pin value of Cn+
150
#define COMP_ACCTL1_ASRCP_PIN0 0x00000200 // Pin value of C0+
151
#define COMP_ACCTL1_ASRCP_REF 0x00000400 // Internal voltage reference
152
#define COMP_ACCTL1_TSLVAL 0x00000080 // Trigger Sense Level Value
153
#define COMP_ACCTL1_TSEN_M 0x00000060 // Trigger Sense
154
#define COMP_ACCTL1_TSEN_LEVEL 0x00000000 // Level sense, see TSLVAL
155
#define COMP_ACCTL1_TSEN_FALL 0x00000020 // Falling edge
156
#define COMP_ACCTL1_TSEN_RISE 0x00000040 // Rising edge
157
#define COMP_ACCTL1_TSEN_BOTH 0x00000060 // Either edge
158
#define COMP_ACCTL1_ISLVAL 0x00000010 // Interrupt Sense Level Value
159
#define COMP_ACCTL1_ISEN_M 0x0000000C // Interrupt Sense
160
#define COMP_ACCTL1_ISEN_LEVEL 0x00000000 // Level sense, see ISLVAL
161
#define COMP_ACCTL1_ISEN_FALL 0x00000004 // Falling edge
162
#define COMP_ACCTL1_ISEN_RISE 0x00000008 // Rising edge
163
#define COMP_ACCTL1_ISEN_BOTH 0x0000000C // Either edge
164
#define COMP_ACCTL1_CINV 0x00000002 // Comparator Output Invert
165
166
//*****************************************************************************
167
//
168
// The following are defines for the bit fields in the COMP_O_ACSTAT2 register.
169
//
170
//*****************************************************************************
171
#define COMP_ACSTAT2_OVAL 0x00000002 // Comparator Output Value
172
173
//*****************************************************************************
174
//
175
// The following are defines for the bit fields in the COMP_O_ACCTL2 register.
176
//
177
//*****************************************************************************
178
#define COMP_ACCTL2_TOEN 0x00000800 // Trigger Output Enable
179
#define COMP_ACCTL2_ASRCP_M 0x00000600 // Analog Source Positive
180
#define COMP_ACCTL2_ASRCP_PIN 0x00000000 // Pin value of Cn+
181
#define COMP_ACCTL2_ASRCP_PIN0 0x00000200 // Pin value of C0+
182
#define COMP_ACCTL2_ASRCP_REF 0x00000400 // Internal voltage reference
183
#define COMP_ACCTL2_TSLVAL 0x00000080 // Trigger Sense Level Value
184
#define COMP_ACCTL2_TSEN_M 0x00000060 // Trigger Sense
185
#define COMP_ACCTL2_TSEN_LEVEL 0x00000000 // Level sense, see TSLVAL
186
#define COMP_ACCTL2_TSEN_FALL 0x00000020 // Falling edge
187
#define COMP_ACCTL2_TSEN_RISE 0x00000040 // Rising edge
188
#define COMP_ACCTL2_TSEN_BOTH 0x00000060 // Either edge
189
#define COMP_ACCTL2_ISLVAL 0x00000010 // Interrupt Sense Level Value
190
#define COMP_ACCTL2_ISEN_M 0x0000000C // Interrupt Sense
191
#define COMP_ACCTL2_ISEN_LEVEL 0x00000000 // Level sense, see ISLVAL
192
#define COMP_ACCTL2_ISEN_FALL 0x00000004 // Falling edge
193
#define COMP_ACCTL2_ISEN_RISE 0x00000008 // Rising edge
194
#define COMP_ACCTL2_ISEN_BOTH 0x0000000C // Either edge
195
#define COMP_ACCTL2_CINV 0x00000002 // Comparator Output Invert
196
197
//*****************************************************************************
198
//
199
// The following are defines for the bit fields in the COMP_O_PP register.
200
//
201
//*****************************************************************************
202
#define COMP_PP_C2O 0x00040000 // Comparator Output 2 Present
203
#define COMP_PP_C1O 0x00020000 // Comparator Output 1 Present
204
#define COMP_PP_C0O 0x00010000 // Comparator Output 0 Present
205
#define COMP_PP_CMP2 0x00000004 // Comparator 2 Present
206
#define COMP_PP_CMP1 0x00000002 // Comparator 1 Present
207
#define COMP_PP_CMP0 0x00000001 // Comparator 0 Present
208
209
#endif // __HW_COMP_H__
© Copyright 1995-2019
, Texas Instruments Incorporated. All rights reserved.
Trademarks
|
Privacy policy
|
Terms of use
|
Terms of sale
